The Eames Lounge Chair Wood (LCW) (also known as Low Chair Wood or Eames Plywood Lounge Chair ) is a chair designed by husband and wife team Charles and Ray Eames.
The chair was designed using technology for moulding plywood that the Eames developed before and during, The Second World War. Before American involvement in the war, Charles and his friend, architect Eero Saarinen, entered a line of furniture into the Museum of Modern Art's "Organic Furniture Competition" in 1940, exploring the natural evolution of furniture in response to the rapidly changing world. Charles and Eero won the competition. However, production of the initially designed chairs was postponed due to production difficulties, and then by the United States entry into WWII.
This interruption proved fortuitous to Charles. He began making molded plywood splints for the U.S. Air Force. The splints were modelled after his own leg and allowed him to hone the technique of molding the plywood into complex curves. The LCW was a result of this experience.
Design
Initially Charles had set out to find a solution to providing affordable, comfortable furniture that could be easily mass produced. His entries into the Organic Furniture competition were designed to have the seat and backrest joined in a singe 'shell'. The plywood, however, was prone to crack when bent into the sharp angles and had to be covered with upholstery. Through extensive trial and error Charles and Ray arrived at an alternate solution: create two separate pieces for the seat and backrest, joined by a plywood lumbar support, with plywood legs. The result was a comfortable chair with a sleek and modern appearance. The seat was joined to the lumbar support and legs with a series of four heavy rubber washers with nuts embedded in them (later these came to be called 'shock mounts'). The shock mounts were glued to the underside of the seat, and screwed in through the bottom of the chair. The backrest was also attached using shock mounts. The rubber mounts were pliable, allowing the backrest to flex when the chair is occupied. This was one of the first examples of a chair with a responsive backrest. This unique technology is also one of the chair's greatest flaws. The shock mounts are securely glued to the wooden backrest, but may tear free if excessive pressure is applied, or if the rubber becomes brittle. A common response to this problem was to drill directly through the backrest and insert fasteners between the backrest and the lumbar support. This greatly devalues the chair and mars the original aesthetic of the smooth, uninterrupted wooden forms.
Even though the plywood chair was a compromise of the Eames' vision to create a single shell chair it still constituted a successful design. Following the LCW the Eames created a family of plywood chairs. The all-plywood Dining Chair Wood (DCW) was constructed in the same manner as the LCW, but with a narrower seat, and longer legs. The Lounge Chair Metal (LCM) and Dining Chair Metal (DCM) were constructed of the same plywood seats and backrests as the LCW & DCW set on a welded metal frame.
Coming out of an age where furniture was heavy and complex; made from multiple materials and then covered in upholstery, the Eames design was a refreshing new way of looking at furniture and furniture design. The chair was produced in a short run by Evans Moulded Plywood of Venice Beach, California for Herman Miller furniture company. Herman Miller later absorbed the production of the chairs and has continued producing them until present day (a brief period existed when the chairs were out of production). In Europe, Vitra became the producers of Eames furniture. These are the only two companies producing chairs licensed by the Eames estate as represented by the Eames Office.
Collectible
The chair continues to be an icon of Modern Design style. It is valued for its comfort as well as its status symbol. Original production models are highly valued by collectors. Herman Miller offered the LCW in a variety of wood veneers over the moulded maple inner plys. The dates below refer to Herman Miller/North American production. No information on Vitra/European production was available.
The value of these chairs to collectors depends on many variables. Generally speaking chairs that are in true original condition are valued the highest, especially those from the earliest production by Evans Co, with red being the most desirable. Modifications to the backrest, damages to the veneer, and excessive wear will reduce value.
- ^ Leslie Pinia, Classic Herman Miller ; 1998
See also
- Eames Lounge Chair
External links
- Herman Miller product page for LCW
- Vintage Eames pages:
Rubber Vibration Isolators, Rubber Shock Mounts, Rubber Vibration ...
Columbia offers varying types of rubber to metal vibration isolators which are designed and manufactured specifically for your application. These isolators are used to diminish ...
Custom Rack mount cases from Custom Case Company - Ottawa
Rubber shock mount Rack case: Close up of rubber shock mount: Pull over syle Shock mount case: Pull over syle Shock mount case (lid removed) Workstation with foam shock mount rack
Shock Mounts Pistol Grips For Shotgun Mics Toronto Canada
Most cameras feature rubber pads inside the ring clamp to allow for some tolerance in barrel size. The design of the suspension shock mount means the microphone is ...
Rubber Shock Mounts
Vibration Mounts << Previous Page: Shock mounts allow torque and pressure to be absorbed into the rubber ...
Make a Rubber Band Shock Mount for your Boom Mic for only $3!
When attaching a boom mic to a pole, you need a special mount to insulate the microphone from pole noise. If the mic is ...
Rubber Vibration Shock Mounts
VIBRATION, SHOCK AND MOTION CONTROL rpm mechanical inc. 1-888-842-5668 www.rpmmechanical.com VIBRATION, SHOCK AND MOTION CONTROL 44 Anti-Vibration Pads An easy and inexpensive way ...
Pegasus - Rubber Shock Mount, 10-32 Threads
Order before 5:00 pm Central Time for Same Day Shipping on most In-Stock orders!
Anti Vibration Mounts Machinery Shock Dampers Urethane Silicone Gel ...
Advanced Antivibration Components Mounts Isolators rubber mountings pad cup suspension mounts
Shock Mounts
Rack Cabinets, Rack Panels, shockmounts ... Rubber Disk Shock Mount (RPS) 12324033-2 Mechanical Rubber Products rubber disk shock mount. 45ยบ chamfer on center hole. 3.25" diameter ...
Stock Drive Products/Sterling Instrument - E Product Manager
SDP/SI 68,000 Master Drive Component Database Includes Free 2-D drawings and 3-D Models