Satellite television is television delivered by the means of communications satellite and received by a satellite dish and set-top box. In many areas of the world it provides a wide range of channels and services, often to areas that are not serviced by terrestrial or cable providers.
History
The first satellite television signal was relayed from Europe to the Telstar satellite over North America in 1962. The first geosynchronous communication satellite, Syncom 2, was launched in 1963. The world's first commercial communication satellite, called Intelsat I (nicknamed Early Bird), was launched into synchronous orbit on April 6 , 1965 . The first national network of satellite television, called Orbita, was created in Soviet Union in 1967, and was based on the principle of using the highly elliptical Molniya satellite for re-broadcasting and delivering of TV signal to ground downlink stations. The first domestic North American satellite to carry television was Canada’s geostationary Anik 1, which was launched in 1972. ATS-6, the world's first experimental educational and Direct Broadcast Satellite, was launched in 1974. The first Soviet geostationary satellite to carry Direct-To-Home television, called Ekran, was launched in 1976.
Technology
Satellites used for television signals are generally in either naturally highly elliptical (with inclination of +/-63.4 degrees and orbital period of about 12 hours, also known as Molniya orbit) or geostationary orbit 37,000 km (22,300 miles) above the earth’s equator.
Satellite television, like other communications relayed by satellite, starts with a transmitting antenna located at an uplink facility. Uplink satellite dishes are very large, as much as 9 to 12 meters (30 to 40 feet) in diameter. The increased diameter results in more accurate aiming and increased signal strength at the satellite. The uplink dish is pointed toward a specific satellite and the uplinked signals are transmitted within a specific frequency range, so as to be received by one of the transponders tuned to that frequency range aboard that satellite. The transponder 'retransmits' the signals back to Earth but at a different frequency band (a process known as translation, used to avoid interference with the uplink signal), typically in the C-band (4–8 GHz) or K u -band (12–18 GHz) or both. The leg of the signal path from the satellite to the receiving Earth station is called the downlink.
A typical satellite has up to 32 transponders for Ku-band and up to 24 for a C-band only satellite, or more for hybrid satellites. Typical transponders each have a bandwidth between 27 MHz and 50 MHz. Each geo-stationary C-band satellite needs to be spaced 2 degrees from the next satellite (to avoid interference). For K u the spacing can be 1 degree. This means that there is an upper limit of 360/2 = 180 geostationary C-band satellites and 360/1 = 360 geostationary K u -band satellites. C-band transmission is susceptible to terrestrial interference while K u -band transmission is affected by rain (as water is an excellent absorber of microwaves at this particular frequency).
The downlinked satellite signal, quite weak after traveling the great distance (see inverse-square law), is collected by a parabolic receiving dish, which reflects the weak signal to the dish’s focal point. Mounted on brackets at the dish's focal point is a device called a feedhorn. This feedhorn is essentially the flared front-end of a section of waveguide that gathers the signals at or near the focal point and 'conducts' them to a probe or pickup connected to a low-noise block downconverter or LNB. The LNB amplifies the relatively weak signals, filters the block of frequencies in which the satellite TV signals are transmitted, and converts the block of frequencies to a lower frequency range in the L-band range. The evolution of LNBs was one of necessity and invention.
The original C-Band satellite TV systems used a Low Noise Amplifier connected to the feedhorn at the focal point of the dish. The amplified signal was then fed via very expensive and sometimes 50 ohm impedance gas filled hardline coaxial cable to an indoor receiver or, in other designs, fed to a downconverter (a mixer and a voltage tuned oscillator with some filter circuitry) for downconversion to an intermediate frequency. The channel selection was controlled, typically by a voltage tuned oscillator with the tuning voltage being fed via a separate cable to the headend. But this design evolved.
Designs for microstrip based converters for Amateur Radio frequencies were adapted for the 4 GHz C-Band. Central to these designs was concept of block downconversion of a range of frequencies to a lower, and technologically more easily handled block of frequencies (intermediate frequency).
The advantages of using an LNB are that cheaper cable could be used to connect the indoor receiver with the satellite TV dish and LNB, and that the technology for handling the signal at L-Band and UHF was far cheaper than that for handling the signal at C-Band frequencies. The shift to cheaper technology from the 50 Ohm impedance cable and N-Connectors of the early C-Band systems to the cheaper 75 Ohm technology and F-Connectors allowed the early satellite TV receivers to use, what were in reality, modified UHF TV tuners which selected the satellite television channel for down conversion to another lower intermediate frequency centered on 70 MHz where it was demodulated. This shift allowed the satellite television DTH industry to change from being a largely hobbyist one where receivers were built in low numbers and complete systems were expensive (costing thousands of Dollars) to a far more commercial one of mass production.
Direct broadcast satellite dishes are fitted with an LNBF, which integrates the feedhorn with the LNB.
The satellite receiver demodulates and converts the signals to the desired form (outputs for television, audio, data, etc.). Sometimes, the receiver includes the capability to unscramble or decrypt; the receiver is then called an Integrated receiver/decoder or IRD. The cable connecting the receiver to the LNBF or LNB must be of the low loss type RG-6, quad shield RG-6 or RG-11, etc. It cannot be standard RG-59.
Standards
Analog television distributed via satellite is usually sent scrambled or unscrambled in NTSC, PAL, or SECAM television broadcast standards. The analog signal is frequency modulated and is converted from an FM signal to what is referred to as baseband. This baseband comprises the video signal and the audio subcarrier(s). The audio subcarrier is further demodulated to provide a raw audio signal.
If the signal is a digitized television signal or multiplex of signals, it is typically QPSK.
In general, digital television, including that transmitted via satellites, are generally based on open standards such as MPEG and DVB-S or ISDB-S.
The conditional access encryption/scrambling methods include BISS, Conax, Digicipher, Irdeto, Nagravision, PowerVu, Viaccess, Videocipher, and VideoGuard. Many conditional access systems have been compromised.
Categories of usage
There are three primary types of satellite television usage: reception direct by the viewer, reception by local television affiliates, or reception by headends for distribution across terrestrial cable systems.
Direct to the viewer reception includes direct broadcast satellite or DBS and television receive-only or TVRO, both used for homes and businesses including hotels, etc.
Direct broadcast via satellite
Direct broadcast satellite, (DBS) also known as "Direct-To-Home" is a relatively recent development in the world of television distribution. “Direct broadcast satellite” can either refer to the communications satellites themselves that deliver DBS service or the actual television service. DBS systems are commonly referred to as "mini-dish" systems. DBS uses the upper portion of the K u band, as well as portions of the K a band.
Modified DBS systems can also run on C-band satellites and have been used by some networks in the past to get around legislation by some countries against reception of K u -band transmissions.
Most of the DBS systems use the DVB-S standard for transmission. With Pay-TV services, the datastream is encrypted and requires proprietary reception equipment. While the underlying reception technology is similar, the Pay-TV technology is proprietary, often consisting of a Conditional Access Module and smart card.
This measure assures satellite television providers that only authorised, paying subscribers have access to Pay TV content but at the same time can allow free-to-air (FTA) channels to be viewed even by the people with standard equipment (DBS receivers without the Conditional Access Modules) available in the market.
Television receive-only
The term Television receive-only, or TVRO, arose during the early days of satellite television reception to differentiate it from commercial satellite television uplink and downlink operations (transmit and receive). This was before there was a DTH satellite television broadcast industry. Satellite television channels at that time were intended to be used by cable television networks rather than received by home viewers. Satellite TV receiver systems were largely constructed by hobbyists and engineers. These TVRO system operated mainly on the C band frequencies and the dishes required were large; t
DISH Network | Get Dish | DISH NETWORK Partner discount program
*$75 MasterCard prepaid card is mailed to your home after activating DISH Network service under the Partner Discount Program. Please allow 4-6 weeks for delivery.
Dish Network Smart Card
In researching Dish Network as a satellite TV provider, you may have asked yourself… Dish Network Smart Card.
DISH Network | Get Dish | DISH NETWORK Partner discount program
In order to receive your $75 MasterCard prepaid card you must place your ... The Partner Discount Program is for new, first time DISH Network customers only.
DISH Network - 1.800.454.0843
Q: Which credit cards does DISH Network accept for payment? A. DISH Network accepts MasterCard, VISA, American Express and Discover. Q: Where should I mail my bill?
Satellite TV Smart Card Exchange - Customer Service & Support - DISH ...
DISH Network Customer Service & Support - more information on Satellite TV Smart Card Exchange - get your questions answered - call 888.825.2557
Activate Satellite Account - Frequently Answered Questions - DISH ...
Do I need a credit card to subscribe to DISH Network? Most of our promotions require a credit card for contractual purposes, as we supply the equipment at little or no cost.
Dish Network Cheater Cards - Web - WebCrawler
Web search results for Dish Network Cheater Cards from WebCrawler Metasearch.
How to Find Dish Network Cards: Satellite Television Info | eHow.com
How to Find Dish Network Cards. Part of the series: Satellite Television Info. The Dish Network smart cards are found in the satellite receiver box, which plays in integral role in ...
How To Program Dish Net Card Offers | How To Program Dish Net Card ...
Special How To Program Dish Net Card Offers. Dishnetwork Offers the Finest Satellite TV. Click here to find more How To Program Dish Net Card information.
How to Program a Dish Network Card: Satellite Television Info | eHow ...
How to Program a Dish Network Card. Part of the series: Satellite Television Info. Programming a Dish Network card involves calling Dish Network directly after installing the ...