Pilates Picture

In human anatomy, the vertebral column ( backbone or spine ) is a column usually consisting of 33 vertebrae, the sacrum, intervertebral discs, and the coccyx situated in the dorsal aspect of the torso, separated by spinal discs. It houses and protects the spinal cord in its spinal canal.

Curves

Viewed laterally the vertebral column presents several curves, which correspond to the different regions of the column, and are called cervical, thoracic, lumbar, and pelvic.

The cervical curve, convex forward, begins at the apex of the odontoid ( tooth-like ) process, and ends at the middle of the second thoracic vertebra; it is the least marked of all the curves.

The thoracic curve, concave forward, begins at the middle of the second and ends at the middle of the twelfth thoracic vertebra. Its most prominent point behind corresponds to the spinous process of the seventh thoracic vertebra. This curve is known as a tt curve.

The lumbar curve is more marked in the female than in the male; it begins at the middle of the last thoracic vertebra, and ends at the sacrovertebral angle. It is convex anteriorly, the convexity of the lower three vertebrae being much greater than that of the upper two. This curve is described as a lordotic curve .

The pelvic curve begins at the sacrovertebral articulation, and ends at the point of the coccyx; its concavity is directed downward and forward. .

The thoracic and pelvic curves are termed primary curves , because they alone are present during fetal life. The cervical and lumbar curves are compensatory or secondary , and are developed after birth, the former when the child is able to hold up its head (at three or four months) and to sit upright (at nine months), the latter at twelve or eighteen months, when the child begins to walk.

Names of individual vertebrae

There are a total of 33 vertebrae in the vertebral column, if assuming 4 coccygeal vertebrae.

The individual vertebrae, named according to region and position, from superior to inferior, are:

• Cervical: 7 vertebrae (C1–C7)
  • C1 is known as "atlas" and supports the head, C2 is known as "axis"
  • Possesses bifid spinous processes, which is absent in C1 and C7
  • Small-bodied
• Thoracic: 12 vertebrae (T1–T12)
  • Distinguished by the presence of costal facets for the articulation of the heads of ribs
  • Body is intermediate in size between the cervical and lumbar vertebrae
• Lumbar: 5 vertebrae (L1–L5)
  • Has a large body
  • Does not have costal facets nor transverse process foramina
• Sacral: 5 (fused) vertebrae (S1–S5)
• Coccygeal: 4 (3–5) (fused) vertebrae (Tailbone)

Surfaces

Anterior surface

When viewed from in front, the width of the bodies of the vertebrae is seen to increase from the second cervical to the first thoracic; there is then a slight diminution in the next three vertebrae; below this there is again a gradual and progressive increase in width as low as the sacrovertebral angle. From this point there is a rapid diminution, to the apex of the coccyx.

Posterior surface

The posterior surface of the vertebral column presents in the median line the spinous processes. In the cervical region (with the exception of the second and seventh vertebrae) these are short and horizontal, with bifid extremities. In the upper part of the thoracic region they are directed obliquely downward; in the middle they are almost vertical, and in the lower part they are nearly horizontal. In the lumbar region they are nearly horizontal. The spinous processes are separated by considerable intervals in the lumbar region, by narrower intervals in the neck, and are closely approximated in the middle of the thoracic region. Occasionally one of these processes deviates a little from the median line — a fact to be remembered in practice, as irregularities of this sort are attendant also on fractures or displacements of the vertebral column. On either side of the spinous processes is the vertebral groove formed by the laminae in the cervical and lumbar regions, where it is shallow, and by the laminae and transverse processes in the thoracic region, where it is deep and broad; these grooves lodge the deep muscles of the back. Lateral to the vertebral grooves are the articular processes, and still more laterally the transverse processes. In the thoracic region, the transverse processes stand backward, on a plane considerably behind that of the same processes in the cervical and lumbar regions. In the cervical region, the transverse processes are placed in front of the articular processes, lateral to the pedicles and between the intervertebral foramina. In the thoracic region they are posterior to the pedicles, intervertebral foramina, and articular processes. In the lumbar region they are in front of the articular processes, but behind the intervertebral foramina.

Lateral surfaces

The lateral surfaces are separated from the posterior surface by the articular processes in the cervical and lumbar regions, and by the transverse processes in the thoracic region. They present, in front, the sides of the bodies of the vertebrae, marked in the thoracic region by the facets for articulation with the heads of the ribs. More posteriorly are the intervertebral foramina, formed by the juxtaposition of the vertebral notches, oval in shape, smallest in the cervical and upper part of the thoracic regions, and gradually increasing in size to the last lumbar. They transmit the spinal nerves and are situated between the transverse processes in the cervical region, and in front of them in the thoracic and lumbar regions.

T3 is at level of medial part of spine of scapula. T7 is at inferior angle of the scapula. L4 is at highest point of iliac crest. S2 is at the level of posterior superior iliac spine. T12 can be found by identifying the lowest pair of ribs and tracing them to their thoracic attachment. Furthermore, C7 is easily localized as a prominence at the lower part of the neck.

Vertebral canal

The vertebral canal follows the different curves of the column; it is large and triangular in those parts of the column which enjoy the greatest freedom of movement, such as the cervical and lumbar regions; and is small and rounded in the thoracic region, where motion is more limited.

Abnormalities

Occasionally the coalescence of the laminae is not completed, and consequently a cleft is left in the arches of the vertebrae, through which a protrusion of the spinal membranes ( dura mater and arachnoid), and generally of the spinal cord ( medulla spinalis ) itself, takes place, constituting the malformation known as spina bifida . This condition is most common in the lumbosacral region, but it may occur in the thoracic or cervical region, or the arches throughout the whole length of the canal may remain incomplete.

The following abnormal curvatures may occur in some people:

• Kyphosis is an exaggerated kyphotic (posterior) curvature in the thoracic region. This produces the so-called "humpback" or "dowager's hump", a condition commonly observed in osteoporosis.
• Lordosis is an exaggerated lordotic (anterior) curvature of the lumbar region, "swayback". Temporary lordosis is common among pregnant women.
• Retrolisthesis is a posterior displacement of one vertebral body with respect to the adjacent vertebral segment to a degree less than a luxation (dislocation).
• Scoliosis, lateral curvature, is the most common abnormal curvature, occurring in 0.5% of the population. It is more common among females and may result from unequal growth of the two sides of one or more vertebrae. It can also be caused by pulmonary atelectasis (partial or complete deflation of one or more lobes of the lungs) as observed in asthma or pneumothorax.

Additional images

See also

• Coccyx
• Low back pain
• Vertebral subluxation
• Retrolisthesis
• Spinal disc herniation
• Scoliosis
• Spinal stenosis

References

1. ^ vertebral column at Dorland's Medical Dictionary
2. ^ Swash, M, Glynn, M.(eds). 2007. Hutchison's Clinical Methods. Edinburgh. Saunders Elsevier.
3. ^ Anatomy Compendium (Godfried Roomans and Anca Dragomir)

Cool Pilates Picture Orange County

Orange County Pilates is happy to present a listing of Classical Pilates Studios outside of Orange County:

...

Park Cities Pilates Center - Authentic Pilates™ Picture Gallery

Park Cities Pilates Center Park Cities Pilates Center in Dallas, Texas - A certified Romana's Pilates™ Studio. Wednesday November 19, 2008

...

Wai Lana Yoga - Pictures - Photo Gallery

asanas | good morning yoga | dvds & videos | music | tv series | bio | newsletter | picture gallery | in the media | pilates

...

Picture Perfect - Power Pilates Articles

Picture Perfect. by: AndreaDow Total views: 2497 Word Count: 710. One of the benefits of pilates is improved posture. Many people brag about getting taller after pilates.

...

Madels Health & Fitness Studio

Click on image to enlarge Footwork Series - Pilates Stance Footwork Series - Arches Footmork Series - Heels Footwork Series - Tendon Stretch The Hundreds

...

Pilates Studio And Classes Directory

Add your pilates business to the Pilates Directory today! "As an Instructor being on ... scales, but instead of just telling you your weight, it gives a much clearer picture of ...

...

Pilates on the Exercise Ball

Pilates, Fitness and the Exercise Ball Find out how fitness balls fit into the Pilates picture. Includes ways to use the ball for core strength, Pilates exercises for the ball ...

...

Joseph Pilates Birth Certificate, House in Moenchengladbach

The Pilates Biographical Picture Gallery Joseph Pilates, age 59: demonstrating Classical Greek Perfection... Pilates with his niece (daughter of Fred Pilates, who lived in St ...

...

Pilates Bodyworks

Pilates has helped to relieve that strain and improved his ... the results that he encouraged his teenage daughter (see picture ...

...

Find a Pilates Exercise Picture for Your Ability!

If you are looking for a Pilates exercise picture then check out the clear pictures and descriptive pictures compiled for you at all levels in the Pilates ebook here.

...